*[[Solaris8 Install for SPARC]] NetraT1 200 [#oa660ea5]
Netra T1 200 (UltraSPARC-IIe 500MHz)
OpenBoot 4.0, 512 MB memory NewDisk(17268MB) シリアル接続
1.Power ON -> okプロンプト
2.Install CDを入れる(Operting Environment Install CD Only Sun Netra T1 AC200)
3.cdromブート (ok prompt> boot cdrom) -> インストールログ参照
4.ネットワークの設定
Install時に失敗していたので、設定する。別紙、「ネットワークの設定」を参照。
5.いらないデーモンの停止 別紙参照
6.セキュリティ強化 別紙参照
7.ユーザ登録 別紙参照
8.必要なプロダクトソフトを導入 それぞれ、別紙参照
(4.〜8.は、ほぼ、7と一緒。違う部分は明記)
これで、使えるようになるはず。
インストールログ
ok
ok boot cdrom
Resett
LOM event: +0h14m24s host reseting ...
Netra T1 200 (UltraSPARC-IIe 500MHz), No Keyboard
OpenBoot 4.0, 512 MB memory installed, Serial #16643802.
Ethernet address 8:0:20:fd:f6:da, Host ID: 80fdf6da.
Executing last command: boot cdrom
Boot device: /pci@1f,0/pci@1,1/ide@d/cdrom@0,0:f File and args:
SunOS Release 5.8 Version Generic_108528-06 64-bit
Copyright 1983-2000 Sun Microsystems, Inc. All rights reserved.
Configuring /dev and /devices
Using RPC Bootparams for network configuration information.
Solaris Web Start 3.0 installer
The Solaris Installer can be run in English, or any of the following languages:
1) English 6) Japanese
2) German 7) Korean
3) Spanish 8) Swedish
4) French 9) Simplified_Chinese
5) Italian 10) Traditional_Chinese
Select the language you want to use to run the installer: 1
English has been selected as the language in which to perform the install.
Starting the Web Start 3.0 Solaris installer
|
Solaris installer is searching the system’s hard disks for a
location to place the Solaris installer software.
The default root disk is /dev/dsk/c1t0d0.
The Solaris installer needs to format
/dev/dsk/c1t0d0 to install Solaris.
WARNING: ALL INFORMATION ON THE DISK WILL BE ERASED!
Do you want to format /dev/dsk/c1t0d0? [y,n,?,q] y
NOTE: The swap size cannot be changed during filesystem layout.
Enter a swap slice size between 382MB and 17268MB, default = 512MB [?] 2048
The Installer prefers that the swap slice is at the beginning of the
disk. This will allow the most flexible filesystem partitioning later in the installation.
Can the swap slice start at the beginning of the disk [y,n,?,q] y
You have selected the following to be used by the Solaris installer:
Disk Slice : /dev/dsk/c1t0d0
Size : 2048 MB
Start Cyl. : 0
WARNING: ALL INFORMATION ON THE DISK WILL BE ERASED!
Is this OK [y,n,?,q] y
The Solaris installer will use disk slice, /dev/dsk/c1t0d0s1.
After files are copied, the system will automatically reboot, and
installation will continue.
Please Wait...
Copying mini-root to local disk....done.
Copying platform specific files....done.
Preparing to reboot and continue installation.
Rebooting to continue the installation.
syncing file systems... done
rebooting...
Resett
LOM event: +0h30m9s host reseting ...
Netra T1 200 (UltraSPARC-IIe 500MHz), No Keyboard
OpenBoot 4.0, 512 MB memory installed, Serial #16643802.
Ethernet address 8:0:20:fd:f6:da, Host ID: 80fdf6da.
Executing last command: boot /pci@1f,0/pci@1/scsi@8/disk@0,0:b
Boot device: /pci@1f,0/pci@1/scsi@8/disk@0,0:b File and args:
SunOS Release 5.8 Version Generic_108528-06 64-bit
Copyright 1983-2000 Sun Microsystems, Inc. All rights reserved.
Configuring devices...
Configuring /dev and /devices
Using RPC Bootparams for network configuration information.
syslog service starting.
savecore: no dump device configured
Running in command line mode
Welcome to the Web Start Solaris Command Line installation!
The following questions will gather information about this system.
This information will be used to configure:
Network
Name Service
Date and Time
Root Password
Power Management
<Press Return to continue>
Please wait while the system information is loaded...
Is this machine networked (y/n) [n]? y
Would you like to configure using DHCP [n]? n
Please enter a host name, which identifies this system on the network. The
name must be unique within the domain in which it resides; creating a duplicate
host name will cause problems on the network after you install Solaris.
A host name must be at least two characters; it can contain letters, digits,
and minus signs (-).
Enter host name []: g32b21d
Please enter the Internet Protocol (IP) Address for this system. It must be
unique and follow your site’s address conventions, or a system/network failure
could result.
IP Addresses contain four sets of numbers separated by periods (for example
129.200.9.1).
Enter this machine’s IP Address []: 192.168.4.237
Please specify the netmask of your subnet. A default netmask is shown; do not
accept the default unless you are sure it is correct for your subnet. A netmask
must contain four sets of numbers separated by periods (for example
255.255.255.0).
Enter the subnet netmask [255.255.255.0]: 255.255.254.0
Specify whether or not IPv6, the next generation Internet Protocol, will be
enabled on this machine. Enabling IPv6 will have no effect if this machine is
not on a network that provides IPv6 service. IPv4 service will not be affected
if IPv6 is enabled.
Enable IPv6 [n]: n
Please provide name service information. Select the name service that will be
used by this system, or None if your system will either, not use a name service
at all, or if it will use a name service not listed here
Available name services:
1. NIS+
2. NIS
3. DNS
4. LDAP
5. None
Please enter the number corresponding to the type of name service you would
like [5]: 3
Please specify the domain where this system resides. Make sure you enter the
name correctly including capitalization and punctuation.
Enter this system’s domain name []: xxx.cc.jp
Please enter the IP Address of your DNS server(s). You must enter at least one
address. IP Addresses must contain four sets of numbers separated by periods
(for example 129.200.9.1).
Enter the first name servers IP Address (this is required) []: 192.168.2.8
Enter the third name servers IP Address, ’n’ for none or ’e’ to end this
section of questions []: 192.168.2.9
Please enter a list of domains that will be searched when a DNS query is made.
If you do not enter any domains, DNS will only search the DNS domain chosen for
this system. The domains entered, when concatenated, may not be longer than 250
characters.
Enter the first search domain, ’n’ for none or ’e’ to end this section of
questions []: e
Please select how to specify your default time zone.
Specify Time Zone by:
1. Geographic region
2. Offset from GMT
3. Time zone file
Please enter the number corresponding to how you would like to specify the
time zone [1]: 1
Please specify your default time zone by geographic region.
Select a region from the first menu and a time zone from the second menu
Available Regions:
1. Africa
2. Asia, Eastern
3. Asia, Western
4. Australia / New Zealand
5. Canada
6. Europe
7. Mexico
8. South America
9. United States
Please enter the number corresponding to the correct region [1]: 2
Available Zones:
1. People’s Republic of China
2. Republic of China / Taiwan
3. Hong Kong
4. Japan
5. Republic of Korea
6. Singapore
Please enter the number corresponding to the correct zone [1]: 4
Accept the default date and time or enter new values.
The default date and time is Mon May 14 13:44:31 JST 2001
. Do you want to use this date and time (y/n) [y]? y
Type in an alphanumeric string to be used as the root password for the computer
you are setting up.
Enter the root password []:hogehoge
Retype the above password for confirmation.
Enter the root password again []:hogehoge
You have entered the following values:
Host Name: g32b21d
IP Address: 192.168.4.237
System part of a subnet: Yes
Netmask: 255.255.254.0
Enable IPv6: No
Name Service: DNS
Domain Name: xxx.xx.jp
Server’s IP Address:
192.168.2.8
192.168.2.9
Search Domain:
Time Zone: Japan
Enter ’y’ to apply these values and proceed to the next stage of the
installation, or ’n’ to return to the beginning and make changes (y/n): y
Please wait while the system is configured with your settings...
The Name Server information entered is incorrect, please go back and enter the
correct information
DNS was selected, you can choose Cancel to re-enter the DNS settings, or Accept
and use the settings already provided.
Would you like to:
1. Accept
2. Cancel
Enter the number corresponding to your choice [1] 1
Please wait while the system is configured with your settings...
Solaris Web Start will assist you in installing software for Solaris.
<Press ENTER to continue>
Please specify the media from which you will install the Solaris 8 Software.
Media:
1. CD
2. Network File System
Media [1]: 1
Please insert the Solaris 8 Software 1 of 2 CD.
To select a different media, enter B to go Back.
[] Solaris8 Software 1 of 2 CD挿入
Reading CD for Solaris 8 Software 1 of 2...
The system is being initialized, please wait...
To install basic Solaris products into their default directory locations,
select Default Install.
Custom install provides a choice of which Solaris products to install. For each
product, it also provides an option to customize the products install.
Types of install available:
1. Default Install
2. Custom Install
Select the number corresponding to the type of install you would like [1]: 1
The Solaris Installer is determining size requirements based on your choices, please wait...
The following items will be installed:
Solaris Operating Environment: Solaris 8 Software
Solaris Software Group: Entire Group
64-Bit Selection: Yes
Region and Locales:
North America
English (United States) ( en_US )
English (POSIX C) ( C )
System Locale: English (United States,ISO8859-1) ( en_US.ISO8
Products:
Solaris 8 Documentation European 204.
AnswerBook2 Documentation Server 37.4
European Collections for Solaris 8 16
Multilingual Computer Systems Supplement CD
CDRW 1.0 0.5 MB
Java3D 1.1.2 13.7 MB
OpenGL 1.2.1 79.3 MB
PC launcher 1.0.1/PC file viewer 1.0.1
RSC 2.0 9.2 MB
ShowMe TV 1.3 22.4 MB
SunATM 5.0 8.4 MB
<--[71%]--[ENTER To Continue]--[n To Finish]-->
SunFDDI PCI 3.0 1.4 MB
SunFDDI SBus 7.0 1.5 MB
SunForum 3.1 19.0 MB
Sun GigabitEthernet 3.0 0.6 MB
SunHSI PCI 3.0 0.5 MB
SunHSI SBus 3.0 0.5 MB
Sun Hardware AnswerBook 8.1 MB
SunVTS 4.2 61.0 MB
Enter ’y’ to accept these values and start the installation, or ’n’ to
return to the beginning and make changes (y/n): n
Types of install available:
1. Default Install
2. Custom Install
Select the number corresponding to the type of install you would like [1]: 2
Select the geographic regions and software localizations you want to install.
The English version of Solaris will be installed by default.
[ ] 0 Northern Africa
[ ] 1 Eastern Europe
[ ] 2 Southern Europe
[ ] 3 Central Europe
[ ] 4 Northern Europe
[ ] 5 Australasia
[-] 6 North America
[ ] 7 Western Europe
[ ] 8 Central America
[ ] 9 South America
[ ] 10 Middle East
[ ] 11 Asia
Select which region(s) to install with the system. You will then be able to
choose individual locales for each region.
To edit a region selection, enter the number here.
Enter n when finished. [n] 11
[ ] 11 Asia
[ ] 11.0 Japanese ( ja )
[ ] 11.1 Japanese (Japan,PCK) ( ja_JP.PCK )
[ ] 11.2 Japanese (Japan,UTF-8) ( ja_JP.UTF-8 )
[ ] 11.3 Korean ( ko )
[ ] 11.4 Korean (UTF-8) ( ko.UTF-8 )
[ ] 11.5 Thai (Thailand) ( th_TH )
[ ] 11.6 Chinese ( zh )
[ ] 11.7 Chinese (GBK) ( zh.GBK )
[ ] 11.8 Chinese (UTF-8) ( zh.UTF-8 )
[ ] 11.9 Chinese (Taiwan) ( zh_TW )
[ ] 11.10 Chinese (Taiwan,BIG5) ( zh_TW.BIG5 )
[ ] 11.11 Chinese (Taiwan,UTF-8) ( zh_TW.UTF-8 )
To toggle locales in Asia, enter the number here.
Enter n when finished. [n] 11.0
[-] 11 Asia
[X] 11.0 Japanese ( ja )
[ ] 11.1 Japanese (Japan,PCK) ( ja_JP.PCK )
[ ] 11.2 Japanese (Japan,UTF-8) ( ja_JP.UTF-8 )
[ ] 11.3 Korean ( ko )
[ ] 11.4 Korean (UTF-8) ( ko.UTF-8 )
[ ] 11.5 Thai (Thailand) ( th_TH )
[ ] 11.6 Chinese ( zh )
[ ] 11.7 Chinese (GBK) ( zh.GBK )
[ ] 11.8 Chinese (UTF-8) ( zh.UTF-8 )
[ ] 11.9 Chinese (Taiwan) ( zh_TW )
[ ] 11.10 Chinese (Taiwan,BIG5) ( zh_TW.BIG5 )
[ ] 11.11 Chinese (Taiwan,UTF-8) ( zh_TW.UTF-8 )
To toggle locales in Asia, enter the number here.
Enter n when finished. [n] n
Select the geographic regions and software localizations you want to install.
The English version of Solaris will be installed by default.
[X] 0 Northern Africa
[ ] 1 Eastern Europe
[ ] 2 Southern Europe
[ ] 3 Central Europe
[ ] 4 Northern Europe
[ ] 5 Australasia
[-] 6 North America
[ ] 7 Western Europe
[ ] 8 Central America
[ ] 9 South America
[ ] 10 Middle East
[-] 11 Asia
To edit a region selection, enter the number here.
Enter n when finished. [n] n
Available regions:
0 Northern Africa
1 North America
2 Asia
3 POSIX
Default locale to be used:
English (United States,ISO8859-1) ( en_US.ISO8859-1 ).
If you wish to change the locale to be used, enter the number next
to the desired region to choose the locale to be used after the system
has been installed or enter n to use the default. [n] 2
Available locales for Asia:
3. Japanese ( ja )
Please enter the number next to the desired locale to be used after the
system has been installed, or enter n to choose a new region. [n] 3
Select the CDs and products you would like to install.
[X] 0 Solaris 8 Documentation European 204.4 MB
[X] 1 Solaris 8 Documentation Asian 122.7 MB
[ ] 2 Solaris 8 Software 2 of 2 0.0 MB
[-] 3 Multilingual Computer Systems Supplement CD 233.9 MB
Select which CD(s) to install with the system. You will then be able to choose
individual products on each CD.
Enter the number corresponding to a CD to view its information.
Enter n when finished [n] n
Additional Products
To scan for additional products, select the location you wish to scan.
Products found at the selected location that are in a Web Start Ready install
form will be added to the Products list.
1. None
2. Product CD
3. Kiosk Download
4. Local or Network File System
Web Start Ready product scan location [1]: 1
Do you want 64-bit support? 64-bit support is required in order to use this
product in 64-bit architecture environments.
1. Software will be installed with 64-bit and 32-bit support (Recommended).
2. Software will be installed with 32-bit support only.
Enter the number corresponding to your choice [1] 1
Available Solaris Software groups:
1. Entire Group Plus OEM
2. Entire Group
3. Developer Group
4. End User Group
5. Core Group
Select the number corresponding to the desired Solaris software group [2]: 3
The Developer Solaris Software Group includes the End User Software Group plus
additional support for software development. This support includes libraries,
include files, man pages and programming tools. Compilers are not included.
Please indicate if you want the Default Packages for the Developer Group or if
you want to select Custom Packages. Selecting Custom Packages allows you to add
or remove packages from the selected Solaris Software Group. When selecting
which packages to add or remove, you will need to know about software
dependencies and how Solaris software is packaged.
1. Default Packages
2. Custom Packages
Default Packages or Custom Packages [1] 1
Select which disks you want to lay out the file systems on.
Required disk space: 4,097 MB
Available Disks:
Disk Size
c1t0d0 17269 MB
Enter ’y’ to layout file systems on the specified disk. This will erase all
existing data on the disk. Enter ’n’ to leave the disk unmodified.
Layout file systems on disk c1t0d0 (bootdisk) (y/n) [y]? y
The Solaris Installer is determining size requirements based on your choices, please wait...
File System operations:
1. Print the current partition table
2. Modify a disk’s partition table
3. Done
Select the number corresponding to a file system operation, or ’Done’ to
proceed with the install [3]: 1
Disk Name Slice Name Size(Mb) Size(Cyls)
c1t0d0
/ 2049 891
swap 2049 891
/export/home 13168 5724
File System operations:
1. Print the current partition table
2. Modify a disk’s partition table
3. Done
Select the number corresponding to a file system operation, or ’Done’ to
proceed with the install [3]: 2
Available disks:
1. c1t0d0
/ 2049 MB 891 Cyls
swap 2049 MB 891 Cyls
/export/home 13168 MB 5724 Cyls
partitionは最終的に以下の通りにした
Disk Name Slice Name Size(Mb) Size(Cyls)
c1t0d0
/ 2049 891
swap 2049 891
/home 4973 2162
/udb1 4096 1781
/udb2 4096 1781
File System operations:
1. Print the current partition table
2. Modify a disk’s partition table
3. Done
Select the number corresponding to a file system operation, or ’Done’ to
proceed with the install [3]: 3
The following items will be installed:
Solaris Operating Environment: Solaris 8 Software
Solaris Software Group: Developer Group
64-Bit Selection: Yes
Region and Locales:
Northern Africa
Arabic ( ar )
North America
English (United States) ( en_US )
Asia
Japanese ( ja )
English (POSIX C) ( C )
System Locale: Japanese ( ja )
Products:
Solaris 8 Documentation European 204.
AnswerBook2 Documentation Server 37.4
European Collections for Solaris 8 16
Solaris 8 Documentation Asian 122.7 M
AnswerBook2 Documentation Server 37.4
Japanese Collections for Solaris 8 85
Multilingual Computer Systems Supplement CD
<--[57%]--[ENTER To Continue]--[n To Finish]-->
CDRW 1.0 0.5 MB
Java3D 1.1.2 13.7 MB
OpenGL 1.2.1 79.3 MB
PC launcher 1.0.1/PC file viewer 1.0.1
RSC 2.0 9.2 MB
ShowMe TV 1.3 22.4 MB
SunATM 5.0 8.4 MB
SunFDDI PCI 3.0 1.4 MB
SunFDDI SBus 7.0 1.5 MB
SunForum 3.1 19.0 MB
Sun GigabitEthernet 3.0 0.6 MB
SunHSI PCI 3.0 0.5 MB
SunHSI SBus 3.0 0.5 MB
Sun Hardware AnswerBook 8.1 MB
SunVTS 4.2 61.0 MB
Enter ’y’ to accept these values and start the installation, or ’n’ to
return to the beginning and make changes (y/n): y
Installing...
Installing Solaris software group
|-1%--------------25%-----------------50%-----------------75%--------------100%|
Installing Additional Software
|-1%--------------25%-----------------50%-----------------75%--------------100%|
Installation details:
Product Result More Info
1. Solaris 8 Software Installed Available
2. Additional Software Installed Available
3. Done
Enter the number corresponding to the desired selection for more
information, or enter 3 to continue [3]: 3
Please specify the media from which you will install Solaris 8 Software 2 of 2
(SPARC Platform Edition).
Alternatively, choose the selection for "Skip" to skip this CD and go on to the
next one.
Media:
1. CD
2. Network File System
3. Skip
Media [1]: 1
Please insert the CD for Solaris 8 Software 2 of 2 (SPARC Platform Edition).
After you insert the CD, please press Enter.
Enter S to skip this CD and go on to the next one.
To select a different media, enter B to go Back.
[] 2 of 2 CD挿入
Reading Solaris 8 Software 2 of 2 (SPARC Platform Edition)....
Launching installer for Solaris 8 Software 2 of 2 (SPARC Platform Edition).
Please Wait...
Installing Solaris 8 Software 2
|-1%--------------25%-----------------50%-----------------75%--------------100%|
Installation details:
Product Result More Info
1. Solaris 8 Software 2 Installed Available
2. Done
Enter the number corresponding to the desired selection for more
information, or enter 2 to continue [2]: 2
End of Solaris 8 Software 2 installation.
<Press ENTER to continue>
Please specify the media from which you will install Solaris 8 Languages (SPARC
Platform Edition).
Alternatively, choose the selection for "Skip" to skip this CD and go on to the
next one.
Media:
1. CD
2. Network File System
3. Skip
Media [1]: 3 面倒になってSkipしちゃった
Please specify the media from which you will install Solaris 8 Documentation
European.
Alternatively, choose the selection for "Skip" to skip this CD and go on to the
next one.
Media:
1. CD
2. Network File System
3. Skip
Media [1]: 3 面倒になってSkipしちゃった
Please specify the media from which you will install Solaris 8 Documentation
Asian.
Alternatively, choose the selection for "Skip" to skip this CD and go on to the
next one.
Media:
1. CD
2. Network File System
3. Skip
Media [1]: 1
Please insert the CD for Solaris 8 Documentation Asian.
After you insert the CD, please press Enter.
Enter S to skip this CD and go on to the next one.
To select a different media, enter B to go Back.
[]Documentation Asian CD挿入
Reading Solaris 8 Documentation Asian.... -
Launching installer for Solaris 8 Documentation Asian. Please Wait...
Installing Solaris AnswerBook2 Server
Log file: /a/var/sadm/install/logs/Solaris_AnswerBook2_Server_install.B05131109
installed pkg: SUNWab2r
installed pkg: SUNWab2s
installed pkg: SUNWab2u
Install complete.
Uninstaller is at: /a/var/sadm/prod/com.sun.AnswerBook2_Server/435696588/uninstall_AnswerBook2_Server.class
Installing Solaris 8 Collections - Japanese
Log file: /a/var/sadm/install/logs/Solaris_8_Collections_-_Japanese_install.B05131112
installed pkg: SUNWjaadm
installed pkg: SUNWjabe
installed pkg: SUNWjabsd
installed pkg: SUNWamaja
installed pkg: SUNWjinab
installed pkg: SUNWjopen
installed pkg: SUNWjdad
installed pkg: SUNWjsup3
installed pkg: SUNWjorn
Install complete.
Uninstaller is at: /a/var/sadm/prod/com.sun.Solaris_8_Collections_ja/411743081/uninstall_Solaris_8_Collections_ja.class
<Press Return to reboot the system>
Installing patch 108528-06...
Checking installed patches...
Re-installing patch 108528-06...
Verifying sufficient filesystem capacity (dry run method)...
Installing patch packages...
Patch number 108528-06 has been successfully installed.
See /a/var/sadm/patch/108528-06/log for details
Patch packages installed:
SUNWarc
SUNWarcx
SUNWcstl
SUNWcstlx
SUNWhea
SUNWmdb
SUNWmdbx
SUNWsrh
SUNWtnfc
SUNWtnfcx
Installing patch 108974-09...
Checking installed patches...
Re-installing patch 108974-09...
Verifying sufficient filesystem capacity (dry run method)...
Installing patch packages...
Patch number 108974-09 has been successfully installed.
See /a/var/sadm/patch/108974-09/log for details
Patch packages installed:
SUNWhea
Installing patch 109874-05...
Checking installed patches...
Re-installing patch 109874-05...
Verifying sufficient filesystem capacity (dry run method)...
Installing patch packages...
Patch number 109874-05 has been successfully installed.
See /a/var/sadm/patch/109874-05/log for details
Patch packages installed:
SUNWaudh
Installing patch 109876-02...
Checking installed patches...
Re-installing patch 109876-02...
Verifying sufficient filesystem capacity (dry run method)...
Installing patch packages...
Patch number 109876-02 has been successfully installed.
See /a/var/sadm/patch/109876-02/log for details
Patch packages installed:
SUNWhea
Installing patch 109882-03...
Checking installed patches...
Re-installing patch 109882-03...
Verifying sufficient filesystem capacity (dry run method)...
Installing patch packages...
Patch number 109882-03 has been successfully installed.
See /a/var/sadm/patch/109882-03/log for details
Executing postpatch script...
Patch packages installed:
SUNWhea
インストール完了! パチパチ
Rebooting now...
syncing file systems... done
rebooting...
Resett
LOM event: +2h26m39s host reseting ...
Netra T1 200 (UltraSPARC-IIe 500MHz), No Keyboard
OpenBoot 4.0, 512 MB memory installed, Serial #16643802.
Ethernet address 8:0:20:fd:f6:da, Host ID: 80fdf6da.
Executing last command: boot
Boot device: disk:a File and args:
SunOS Release 5.8 Version Generic_108528-06 64-bit
Copyright 1983-2000 Sun Microsystems, Inc. All rights reserved.
configuring IPv4 interfaces: eri0.
Hostname: g32b21d
Configuring /dev and /devices
Configuring the /dev directory (compatibility devices)
The system is coming up. Please wait.
checking ufs filesystems
/dev/rdsk/c1t0d0s7: is clean.
/dev/rdsk/c1t0d0s6: is clean.
/dev/rdsk/c1t0d0s5: is clean.
Configuring network interface addresses: eri0 eri1.
RPC: Timed out
Starting IPv4 routing daemon.
starting rpc services: rpcbind done.
Setting netmask of eri0 to 255.255.254.0
Setting default IPv4 interface for multicast: add net 224.0/4: gateway g32b21d
syslog service starting.
automount: /home: already mounted
Print services started.
volume management starting.
May 14 15:34:49 g32b21d sendmail[345]: My unqualified host name (g32b21d) unknown; sleeping for retry
Starting Web Start Launcher in Command Line Mode.
Please specify the media from which you will install Multilingual Computer
Systems Supplement CD.
Alternatively, choose the selection for "Skip" to skip this CD and go on to the
next one.
Media:
1. CD
2. Network File System
3. Skip
Media [1]: 3
May 14 15:35:49 g32b21d sendmail[345]: unable to qualify my own domain name (g32b21d) -- using short name
<Press Return to reboot the system>
May 14 15:35:58 g32b21d reboot: rebooted by root
May 14 15:35:58 g32b21d syslogd: going down on signal 15
May 14 15:35:58 rpcbind: rpcbind terminating on signal.
May 14 15:35:58 cssd: Got sig#15, sending it to all CSes and exit
syncing file systems... done
rebooting...
Resett
LOM event: +2h30m58s host reseting ...
Netra T1 200 (UltraSPARC-IIe 500MHz), No Keyboard
OpenBoot 4.0, 512 MB memory installed, Serial #16643802.
Ethernet address 8:0:20:fd:f6:da, Host ID: 80fdf6da.
Executing last command: boot
Boot device: disk:a File and args:
SunOS Release 5.8 Version Generic_108528-06 64-bit
Copyright 1983-2000 Sun Microsystems, Inc. All rights reserved.
configuring IPv4 interfaces: eri0.
Hostname: g32b21d
The system is coming up. Please wait.
checking ufs filesystems
/dev/rdsk/c1t0d0s7: is clean.
/dev/rdsk/c1t0d0s6: is clean.
/dev/rdsk/c1t0d0s5: is clean.
Starting IPv4 routing daemon.
starting rpc services: rpcbind done.
Setting netmask of eri0 to 255.255.254.0
Setting default IPv4 interface for multicast: add net 224.0/4: gateway g32b21d
syslog service starting.
automount: /home: already mounted
Print services started.
volume management starting.
May 14 15:37:31 g32b21d sendmail[208]: My unqualified host name (g32b21d) unknown; sleeping for retry
The system is ready.
やっぱり、DNSの設定に失敗。手動作業を後で
g32b21d console login: May 14 15:38:31 g32b21d sendmail[208]: unable to qualify my own domain name (g32b21d) -- using sh
ort name
g32b21d console login: root
Password:
May 14 15:59:34 g32b21d login: ROOT LOGIN /dev/console
Sun Microsystems Inc. SunOS 5.8 Generic February 2000
#
#
# df
/ (/dev/dsk/c1t0d0s0 ): 2415646 blocks 293831 files
/proc (/proc ): 0 blocks 7878 files
/dev/fd (fd ): 0 blocks 0 files
/etc/mnttab (mnttab ): 0 blocks 0 files
/var/run (swap ): 4981200 blocks 53981 files
/tmp (swap ): 4981200 blocks 53981 files
/home (/dev/dsk/c1t0d0s5 ):10030474 blocks 614588 files
/udb1 (/dev/dsk/c1t0d0s6 ): 8263714 blocks 502844 files
/udb2 (/dev/dsk/c1t0d0s7 ): 8263714 blocks 502844 files
# df -k
Filesystem kbytes used avail capacity Mounted on
/dev/dsk/c1t0d0s0 2056211 848388 1146137 43% /
/proc 0 0 0 0% /proc
fd 0 0 0 0% /dev/fd
mnttab 0 0 0 0% /etc/mnttab
swap 2490600 0 2490600 0% /var/run
swap 2490616 16 2490600 1% /tmp
/dev/dsk/c1t0d0s5 5015246 9 4965085 1% /home
/dev/dsk/c1t0d0s6 4131866 9 4090539 1% /udb1
/dev/dsk/c1t0d0s7 4131866 9 4090539 1% /udb2
# date
2001G/057n14F| (7n) 15;~59J,57IC JST
# set
HOME=/
HZ=100
IFS=
LANG=ja
LOGNAME=root
MAIL=/var/mail/root
MAILCHECK=600
OPTIND=1
PATH=/usr/sbin:/usr/bin
PS1=#
PS2=>
SHELL=/sbin/sh
TERM=sun
TZ=Japan